Why is my red light therapy panel flashing red

# Why Is My Red Light Therapy Panel Flashing Red?

**Quick Fix:** Unplug your red light therapy panel immediately, wait 60 seconds, and plug it directly into a different wall outlet (bypassing any surge protectors or extension cords) to perform a hard system reset.

If the quick reset does not resolve the issue, a flashing red light on your therapy panel indicates a safety warning, power disruption, or internal hardware malfunction.

### Why Your Panel is Flashing Red

* **Overheating Protection:** Most high-quality panels feature built-in thermal sensors. If the internal temperature gets too high, the panel will flash red and automatically shut down to protect the LEDs from heat damage.
* **Voltage Instability:** If the panel is plugged into a faulty power strip, extension cord, or an outlet with fluctuating voltage, the LED drivers will struggle to maintain a steady current, causing a flashing or strobing effect.
* **Loose Internal Connections:** If the panel was recently moved or dropped, a wire connecting the power supply to the LED driver board may have loosened, causing intermittent power delivery.
* **LED Driver Failure:** The internal driver regulates the electrical current to the lights. If this component is failing or reaching the end of its lifespan, it will cause the LEDs to flash red.

### Step-by-Step DIY Troubleshooting

* **Cool Down the Unit:** Turn off the panel and let it sit unplugged for 30 to 45 minutes. Ensure the cooling fans on the back are completely free of dust and are not blocked by blankets, clothing, or walls.
* **Secure the Power Cord:** Unplug the power cord from both the wall and the inlet port on the back of the panel. Reinsert both ends firmly to ensure a tight, secure connection.
* **Test a Different Wall Outlet:** Plug the panel directly into a wall outlet in a different room to rule out a localized circuit or breaker issue.
* **Isolate the Control Panel:** If your panel has a digital screen or remote, check if the flashing only occurs on certain settings (such as “Pulse” mode, which might be accidentally activated).
* **Check for Error Codes:** Look at the digital display (if applicable) for error codes like “E1” (Overheating) or “E2” (Voltage Error) which pinpoint the exact cause of the flashing.

*Note: If the panel continues to flash red after trying these steps, the internal LED driver is likely damaged and the unit will need to be repaired or replaced under manufacturer warranty.*

Recommended Fix

If the panel continues to flash red after trying the troubleshooting steps, the internal LED driver is likely damaged and the unit will need to be repaired or replaced under manufacturer warranty.*

Mito Red Light – MitoMIN 2.0 Red Light Panel – Red Light Therapy for Face and Neck – Red Light & Near Infrared Red Light Therapy – At-Home Red Light Therapy for Body.

As an Amazon Associate, we earn from qualifying purchases.