**Quick Fix:** To replace your Dyson air purifier filter, unplug the machine, press the release buttons on the sides of the outer shroud to remove the old filter, click the new filter into place, and hold the remote’s “Standby” button for six seconds to reset the filter life timer.
### **Step-by-Step Dyson Filter Replacement Guide**
Follow these steps to safely swap out your dirty filter and reset your machine:
* **Step 1: Power Down and Unplug**
* Turn off the air purifier using the remote or the power button on the base.
* Unplug the power cord from the wall outlet to ensure safety.
* **Step 2: Remove the Filter Shroud**
* Locate the two release buttons on either side of the loop amplifier (the main body) or the lower shroud.
* Press both buttons down simultaneously.
* Lift the shroud/grates up and away from the base of the machine.
* **Step 3: Dispose of the Old Filter**
* Pull the old filter(s) out of the shroud. If your model has a separate HEPA and carbon filter, remove both.
* Place the old filters directly into a trash bag to prevent trapped dust and allergens from escaping into your room.
* **Step 4: Install the New Filter**
* Remove all protective plastic packaging from your new Dyson replacement filter.
* Slide the new filter into the shroud (or onto the base, depending on your model) until you hear a secure click.
* *Note:* Ensure any directional arrows on the filter are pointing upward.
* **Step 5: Reassemble the Purifier**
* Align the shroud back over the base of the machine.
* Push down firmly until the side latches click securely back into place.
* Plug the power cord back into the wall outlet.
* **Step 6: Reset the Filter Life Indicator**
* **Using the Remote:** Point the remote at the purifier’s screen, then press and hold the **Standby (ON/OFF)** button (or the **Night Mode** button, depending on the model) for 6 seconds. A countdown will appear, resetting the filter life to 100%.
* **Using the App:** If your machine is connected, open the MyDyson app, go to settings, select “Filter Life,” and tap “Reset.”
Recommended Fix
[To replace your Dyson air purifier filter, unplug the machine, press the release buttons on the sides of the outer shroud to remove the old filter, click the new filter into place, and hold the remote’s “Standby” button for six seconds to reset the filter life timer.]
[360° Combi Glass Efficient and Activated Carbon Filter Fit For Dyson] — [Activated Carbon Filter Fit For Dyson TP07 HP07 TP10 HP10 TP06 HP06 TP04 HP04 PH01 PH02 PH03 PH04 TP09 HP09 Air Purifier, 2-in-1 Replacement Filter, 2 Pack].
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply